HQ 21816 Cage Assembly Instruction

1. Carefully open the box and remove contents.
2. Study the diagram.
3. Attach the 4 casters to the legs.
4. Attach the legs to the stand frame and screw up with short machine screws. Make sure to leave the side with bar open. This side is for the cage to sit on.
5. Take the four panels of the cage. Attach both side panels to the front and back panels.
6. Put on the top (2 curved panels) and screw.
7. Put in the perch at desired level.
8. Attach feed cup rings to the feed cup door.
9. Slide in the grate and tray.
10. Put on seed guards.

Note: There will be unused screws, as extra screws are included with each cage

HQ 36432 Cage Assembly Instruction

There are a total of 3 boxes

1. Carefully lay the box on the floor and remove the parts.
2. Review the enclosed diagram.
3. First, install the wheels to the appropriate panels (6 total).
Front and back panels each get one wheel.
Center panels with divider each get 2 wheels.
4. Have 2nd person hold the center panel or lean against wall with secure stoppers
Ensure that the panel is secure, as wheels keep it from staying in place.
5. Attach the four panels to the center panel.
Ensure the panels with the doors are facing the correct direction.
Once the panels are installed, the cage can stand free.
6. Attach side panel with feed cups.
Ensure feed cup doors are facing the correct direction.
7. Attach the two top corners (curved)
8. Attach the top of the cage.
9. Attach the grate and tray fit.
10. Install the feed cups and perches.


Note: There will be unused screws, as extra screws are included with each cage.